Vinal – 100% Acrylic Paints
Vinal – 100% Acrylic Paints is an acrylic co-polymer based superior primer to be used on cementitious as well as on wooden surfaces. vinal exterior with high grip & bonding capacity is a perfect primer to form a tougher yet flexible film, which adheres wonderfully to the surface applied. It is highly recommended for all kinds of emulsion paints.
- Enhanced better finish.
- Exclusive primer for both cementitious& wooden surface.
- Forming a seal coat which is non-absorbent, tough & flexible.
- Possible to increase coverage of paint.
For Cementitious Surface:
Ensure the surface is structurally sound and free from dust, loose & poorly bonded materials. Any fault or damage in the structure which may cause moisture / dampness / water penetration should be repaired. In case of any organic / fungus growth, common domestic bleaching powder (Calcium Hypochlorite 35% Chlorine) can be used effectively for anti-fungal treatment. Add 2kgs. of bleaching powder to 50 ltrs. of clean water and mix well. Clean the surface intended for allocation. Brush the bleaching powder Mixture onto the cleaned surface and leave for 24 hours. After leaving it for a day, wash the surface well with clean water.
For Wooden Surface:
The Surface should be made free of grease/oil or stains. Rub the wooden surface with a fine emery paper to make it smooth. Wipe off the saw dust.
- For cementitious surface: 1 litre primer: Vz litre, clean water.
- For wooden surface: 1 litre primer : ¼ litre, clean water Stir well before use.
- Apply the diluted vinal exterior primer well with a brush or roller. Let it dry for 4-6 hours before application of paint.
Packing:vinal exterior Primer is available in 1 Ltr, 4 Ltr, 10 Ltr & 20 Ltr. Containers. Sales & Service: vinal exterior is made available through a chain of authorized stockists and distributors. We insist that you purchase through such authorized outlets only.
Free Technical Service & Advice:
Avail of our free technical advice and guidance provided at major outlets. You could also correspond at the registered address for advice and guidance
||Uniform smooth finish
||Touch dry 30-40 minutes Hard dry for recoating 4 Hrs.
||10 – 12 Sq. Meter per Liter / coat
||1.35 to 1.45
The information in this literature is given in good faith, but without warranty, as conditions of storage and use vary and beyond our control.