VINAL ACRYLIC POWDER PUTTY

VINAL ACRYLIC POWDER PUTTY

VINAL ACRYLIC POWDER PUTTY is the wall putty in the powder form that gives your wall super smooth finish. It is faster to prepare, apply, dry and faster to paint. Being acrylic based it is primer free.

PERFORMANCE FEATURES & BENEFITS:

  • Superior smoothness and highly even wall finish
  • Ready to paint within 48 hours
  • Plastic binding makes it more resistant to cracks and flakes
  • Special additives keep it free from deterioration for years
  • Can be used for all kinds of surfaces (sands, cement, Plaster, Plywood, gypsum, etc.)
  • Also it can be used for new as well as old surfaces
  • Self priming putty (Acrylic Base)
service

RECOMMENDED USAGE :

Vinal Acrylic Powder Putty can be applied on all types of interior walls, asbestos sheet, concrete etc.

RECOMMENDED APPLICATION :

Ensure that the surface to be painted is free from any loose paint, dust, oil or grease. Surface imperfections such as holes and dents are to be filled using a mixture of white cement and fine sand in the ratio of 1:3. Prewet the surface with water before application of 1st (initial) coat of wall putty.

 

Product Thinner Dilution %(by volume) Application Viscosity (sec) Recoating ** Period (hrs)
Sand the surface With emery Paper 180 and Wipe clean
Vinal Water Base Primer Brush, Spray water 8-10 15-20 30-40 20-25 6-8 hrs
vinal Acrylic putty Putty Knife Water As required N.A. 4-6 hrs
Sand the surface With emery Paper 180 and Wipe clean
Vinal Water base Primer Brush, Spray Water 8-10 15-20 30-40 20-25 6-8 hrs
Sand the surface With emery Paper 320 and Wipe clean
Vinal Interior Emulsion | 1 coat Brush, Roller, Spray Water 40-45,65-70 20-25,20-25 4 hrs
Vinal Interior Emulsion |2 Coats Brush,Roller, Spray Water 40-45,65-70 20-25,20-25 4 hrs

**Recoat Period is quoted for 25.C and 50% Relative Humidity; this may vary under different conditions.

Technical Details:

Coverage ** : 13-15 sq.ft./ kg /coat
Pot life of thinned material : 1 .5 hrs. (Temp. 30 +/-2.C, % RH 65 +/-5)
Dry to Recoat : 2 – 3 hrs. (Temp. 30 +/- 2.C, %RH 65 +/- 5)
Shelf – Life : 1 year from date of manufacture in tightly closed containers away from direct sunlight and excessive heat

**Actual Coverage may vary from the quoted coverage due to factors such as method and condition of application and surface roughness.

PRECAUTIONS:

  • Before application of the material surface should be clean and free from efflorescence/lime blooming
  • Do not apply the material without prewetting the surface for the first coat
  • Ensure that the material is mixed homogeneously with water and allowed to stand 5-10 minutes before application
  • Do not stand material vigorously with emery paper otherwise it will reduce the strength of the material
  • Do not apply the materials to fill the structural cracks
  • Though the material is non-toxic , care should be taken to avoid dust inhalation while mixing and handling

POST APPLICATION INSTRUCTION

For the best performance ensure proper washing and cleaning of algal or fungal growth if any at regular intervals.

SAFETY FEATURES

Non – toxic and Non – flammable

PACK SIZES AND SHADE RANGE

  • Pack size available: 20 Kg Bag
  • Shade range:
  • White